Writer pens (Type 2 - no pin)

Buy this
  • £3.50
  • 2 Left
100% SSL Secure

Just like the ones you used to use at our studio…after you have done all your base colours, simply fill with the FIRED ceramic paint colour of your choice to do lettering, ‘dots and spots’ and other decorations. Just be sure to PRACTISE on your palette first! (You may need to give it a gentle shake to make the paint flow to the ‘top’.

Wipe the nozzle every now and then to remove any build up. Only ONE layer required when using our ceramic paints and remember not to hold the hairdryer close – or you may end up with a dribble or a Halloween splat!

If you make a mistake, THOROUGHLY dry the paint and then you can scratch it off. If paint has dried in the nozzle, run warm water through it – do not try to prod the dry paint with the pin – it will most likely just bend the pin! To use a different colour, thoroughly wash out any remaining paint and ensure the nozzle is also clean.

CAUTION! The lid contains a rod of metal designed to keep the paint from drying in the nozzle. This can sometimes be pushed down and through the plastic tip, so please exercise caution to prevent injury when assisting children in using these.

One item supplied empty. (Medium is blue, large is yellow)

You may be able to use it with other paints, although we don’t recommend it as they will probably clog the nozzle.